Chapter7 FunctionMenu

7-2 Function Menu Item List

Page 2

Item

Setting

 

 

 

 

F1 (V.PROC)

Selects the control method for the internal digital video processor.

 

 

: Change the settings of the internal digital video processor by using this function menu.

 

LOCAL

 

REMOTE: Use the optional BVR-50/50P Remote Control Unit to control the internal digital video

 

processor.

 

MENU: Change the settings of the internal digital video processor by using the MENU of the HOME page.

 

 

 

 

F2 (VIDEO)

Sets the video signal output level (–∞to +3 dB).

 

 

: Regardless of manually values, the video signal is set to the standard level.

 

PRESET

 

Manual setting: With the displayed setting flashing, you can rotate the MULTI CONTROL knob to adjust

 

the value for the video signal output level.

 

 

 

 

F3 (CHROMA)

Sets the chroma signal output level (–∞to +3 dB).

 

 

: Regardless of manually set values, the chroma signal is set to the standard level.

 

PRESET

 

Manual setting: With the displayed setting flashing, you can rotate the MULTI CONTROL knob to adjust

 

the value for the chroma signal output level.

 

 

 

 

F4 (HUE) (525-

Sets the color phase (phase relative to burst)

line mode)/

 

 

 

PRESET

: Regardless of manually set values, the color phase is set to the standard value.

(C PHAS) (625-

Manual setting: With the displayed setting flashing, you can rotate the MULTI CONTROL knob to adjust

line mode)

 

the value across the range ±30°.

 

 

 

 

F5 (SETUP)

Sets the setup level (525/60 mode) or black level (625/50 mode)

(525-line mode)/

 

 

 

PRESET

: Regardless of manually set values, the level is set to the standard value.

(BLACK) (625-

Manual setting: With the displayed setting flashing, you can rotate the MULTI CONTROL knob to adjust

line mode)

 

the setup level across the range ±30 IRE (525/60 mode) or to adjust the black level across the range

 

±210 mV (625/50 mode).

 

 

 

 

F6 (YC DLY)

Sets amount of Y/C delay.

 

 

: Regardless of manually set values, the Y/C delay is to the standard value.

 

PRESET

 

Manual setting: With the displayed setting flashing, you can rotate the MULTI CONTROL knob to adjust

 

the Y/C delay across the range ±100 ns.

 

 

 

 

7-4Chapter 7 Function Menu