Chapter8 SetupMenus

8-2 Setup Menu Operations

Resetting the menu settings to their factory default values (menu item B20)

To reset the current active menu settings to their factory default values, proceed as follows.

1 Perform steps 1 to 3 of the procedure described in the section “To change the settings of menu items without sub-items” on page 8-3 to set menu item B20 RESET SETUP to ON.

The current active menu settings are reset to their factory default settings.

2 Press the F5 (SET) button again.

This saves the menu settings.

Switching between 525-line and 625-line modes (menu item 013)

To switch between 525-line (NTSC) and 625-line (PAL) operation modes, proceed as follows.

Notes

•Before carrying out this operation, consult the person responsible for system installation.

•When the MSW-M2100 is used in the 625-line mode or when the MSW-M2100P is used in 525-line mode, analog tape can only be played back in the simple playback mode.

1 Perform steps 1 to 3 of the procedure described in the section “To change the settings of menu items without sub-items” on page 8-3 to set menu item 013 525/625 SYSTEM SELECT to ON.

You can now change the selection between 525- line and 625-line operation modes.

2 Switch the setting, then press the F5 (SET) button.

3 Turn the unit off.

Next time the unit is turned on, it operates in the new mode.

Menu bank operations (menu items B01 to B13)

This unit allows menu settings to be saved in what are termed “menu banks.” Saved sets of menu settings can be recalled for use as required.

To save the current active menu settings Set one of menu items B11 SAVE BANK 1 to B13 SAVE BANK 3 to ON, depending on which of the menu banks you wish to save in, then press the F5 (SET) button.

To recall settings from a menu bank

When recalling the settings saved in one of menu banks 1 to 3, set the corresponding one of menu items B01 RECALL BANK 1 to B03 RECALL BANK 3 to ON, then press the F5(SET) button.

When you wish to recall the settings saved in menu bank 4, select bank-4 with menu item B20 PRESET SETUP.

For details about menu bank 4, refer to the Maintenance Manual.

 

 

Recall (B01)

 

 

 

Save

Current active

 

Menu bank 1

 

 

 

 

Save (B11)

 

 

menu settings

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Recall (B02)

 

 

 

 

 

 

a)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Menu bank 2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Save (B12)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

a)

 

 

 

 

 

 

 

Recall (B03)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Menu bank 3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Save (B13)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

a)

 

 

 

 

 

 

 

Recall (B20)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Menu bank 4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Save

a)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

a) Use maintenance menu item 122.

The current active setup menu settings as well as settings saved in menu banks are stored in separate storage areas for 525-line and 625-line modes.

8-4Chapter 8 Setup Menus