Sony MZ-N910 Using the group function when playing, Jog lever, (., >, ENT), 3 Play the source sound, 1 Press GROUP and press . or, Playing a track in group play

Recording a track to an existing groupYou can add a track to an existing group.1 Press GROUP and press . or >until the group you want to add a track to appears in the display.

2 While pressing GROUP, press and slide REC.

3 Play the source sound.

z

•To add a track that is currently playing to a group, stop or pause playing the track first, and then do the procedure from step 2.

•You can set the recorder to always create a new group without pressing the GROUP button. See page 60 for details.

Using the group function when playingThe recorder can operate various playback with a disc which has group setting.

This section explains the operations that are done on the remote control. For details on operations done on the recorder, see page 61.

	P MODE/
Jog lever	+, –
(., >, ENT)

Playing a track in group play

In group play, all groups are played in order, starting with group 1, followed by the unassigned tracks (“Group --”). Playback stops after all the tracks have been played.

1 While playing, press P MODE/ until “” appears in the display.To cue to the start of a group (Group Skip)

1While playing, press + or –.

Pressing the – button cues to the first track in the current group. Pressing the button again cues to the first track of the previous group.

47