Sony SX-MT321 Preset Number Tuning, Press BAND to select a band, To change the AM tuning interval

PRESET NUMBER TUNING

Use the remote control to select the preset number directly.

1 Press BAND to select a band.

2 Press numbered buttons O-9 and +10 to select a preset number.

Example:

To select preset number 20, press +10, +10 and O.

To select preset number 15, press +10 and 5.

Selecting a preset number on the main unit

Press TUNER BAND to select a band. Then, press ➤ PRESET repeatedly or turn MULTI JOG.

Each time b PRESET is pressed, the next ascending number is selected.

To clear a preset station

Select the preset number of the station to be cleared. Then, press

■CLEAR, and press II SET within 4 seconds.

The preset numbers of all other stations in the band with higher numbers are also decreased by one.

To change the AM tuning interval

The default setting of the AM tuning interval is 10 kHz/step.

If you use this unit in an area where the frequency allocation

system is 9 kHz/step, change the tuning interval.

Press POWER while pressing TUNER BAND.

To reset the interval, repeat this procedure.

m

When the AM tuning interval is changed, all preset stations are cleared. The preset stations have to be set again.

ENGLISH 1()