Sony NSX-MT320, SX-MT321 manual Super T-Bass System, To change the lefth’ight balance, Press T-BASS

T-BASS

MANUAL

SELECT

VOLUME

M

DOWN,

E(JP

Turn VOLUME on the main unit, or press VOLUME on the remote control.

The volume Iewel is displayed as a number from Oto MAX (50). The volume level is automatically set to 20 when the power is turned off with the volume level set to 21 or more.

To change the lefth’ight balance

Press MANUAL SELECT on the remote control, UR is displayed

for 2 seconds. Press+ DOWN or - UP on the remote control within these 2 seconds.

●The DOLBY PRO LOGIC front speakers level is also changed. (See page 17)

SUPER T-BASS SYSTEM

The T-BASS system enhances the realism of low-frequency sound.

Press T-BASS.

Each time it is pressed, the level changes. Select one of the three levels, or the off position to suit your preference.

This unit provides the following 3 different programmed equalization curves.

ROCK: Powerful sound emphasizing treble and bass

POP: More presence in the vocals and midrange

CLASSIC: Enriched sound with heavy bass and fine treble.

GEQ

PHONES

MULTI

JOG

Press GEQ repeatedly until the desired equalization curve is displayed.

“GRAPHICEQUALIZER appears (except “GEQOFF) and the GEQ mode is displayed cyclically as follows.

ROCK— POP — CLASSIC—	GEQ OFF
r	(cancel) 1

m

Low frequency sound may be distorted when the T-BASS system is used for a disc or tape in which low frequency sound is originally emphasized. In this case, cancel the T-BASS system.

Using the headphones

Connect headphones to the PHONES jack with a standard stereo plug (@6.3mm, ‘/, inch).

No sound is output from the speakers while the headphones are plugged in.

● When the headphones are plugged in, the DOLBY PRO LOGIC is canceled.

Sound adjustment during recording

The output volume and tone of the speakers or headphones may be freely varied without affecting the recording.

7 ENGLISH