5Press (PUSH) of the Seesaw key
“VOL LO xx”* blinks
* xx is a numeric value
set the settings of LO, MID, or HI
@Sets numeric of LO
@Press b to display “VOL MID xx,” and set it using ‘I+/- “
7Press (PUSH) of the Seesaw key
The display returns to normal
While the above settings, the volume can
To exit from the Menu mode
Select [RETURN] in the menu or press the MENU button
Note
If AVLS is set (page 14), the volume may be lower than previous settings
To turn off the beep sound (BEEP)
BEEP ON: a beep will sound to indicate that
operation has been accepted
BEEP OFF: no beep sound will be heard
1 Press the MENU button
The menu is displayed
1 R REP OFF
2Press 4 or b of the Seesaw key to
display “BEEP : ON “
1 B BEEP ON
3Press (PUSH) of the Seesaw key
“ON” blinks
4Press 4 or W of the Seesaw key to
display “OFF ”
5 Press (PUSH) of the Seesaw key
6 Press the MENU button
The display returns to normal
To exit from the Menu mode
Select [RETURN] in the menu or press the MENU button
To turn on the beep sound
Select ON in step 4
continued 17
