AUDIO IN/OUT (phono jack)

These are the input/output jacks for an audio signal. Connect them to the audio input/output jacks on equipment such as a VCR.

eRGB/COMPONENT connectors (for the PVM- 14L2/PVM-20L2 only)

Analog RGB signal or component (Y, PB, PR) signal input connectors and their loop-through output connectors.

Press the RGB/COMPONENT button on the control panel to monitor the signal input through these connectors.

G/Y, B/PB, R/PR IN/OUT (BNC)

These are the input/output connectors for an analog RGB and a component (Y, PB, PR) signal. Unless an external sync signal is input, the monitor is synchronized with the sync signal contained in the G/ Y signal.

AUDIO IN/OUT (phono jack)

When using an analog RGB or a component signal as a video signal, use these jacks for the input/output of an audio signal. Connect them to the audio input/ output jacks on equipment such as a VCR.

fEXT SYNC (external sync) connectorsPress the EXT SYNC button on the control panel to use an external sync signal.IN/OUT (BNC)

These are the input/output connectors for an external sync signal. Input a reference signal generated by a sync generator to the IN connector. Connect the OUT connector to an external sync signal input connector on equipment which you intend to synchronize with this monitor.

gPARALLEL REMOTE terminal (modular

This product is intended to be supplied by a Listed Power Unit marked “Class 2” and rated 12 V dc, 4.2 A.

jBattery attachment (for the PVM-9L3/PVM- 9L2 only)

Install the battery here. For the PVM-9L3/PVM-9L2, a Sony lithium-ion battery, the BP-L60A/BP-L90A, or a Sony nickel metal hydride battery, the BP-M50/BP- M100, is applicable.

Selecting the Menu Language

You can select one of seven languages (English, German, French, Italian, Spanish, Japanese, Chinese) for displaying the menus and other on-screen messages. The factory preset language is ENGLISH (English). The current settings are displayed in place of the marks on the illustrations of the menu screen.

 

 

 

 

 

MENU/EXIT

 

 

 

 

 

button

LINE

LINE

RGB/

OPTION

OPTION

 

A

B

COMPONENT

A

B

MENU

 

 

 

 

 

E X I T

 

RESET

 

 

 

SELECT

DEGAUSS

BLUE

UNDER

16 : 9

EXT

ENTER

 

ONLY

SCAN

 

SYNC

 

 

 

connector)Forms a parallel switch and controls the monitor externally.
M/+, m/– button

ENTER/SELECT button

For details on the pin assignment and factory setting function assigned to each pin, see page 33.

hOPTION AUDIO INPUT 1, 2 input connectors If an optional board has been installed in the option slot, input an audio signal into these connectors. You can connect up to 2 systems. To monitor the audio signals input to OPTION AUDIO INPUT 1 or 2, press either the OPTION A or OPTION B button.

iDC 12V IN connector (XLR) (for the PVM-9L3/ PVM-9L2 only)Plug the DC 12V power supply to this connector to provide power to the monitor.

1 Press the MENU/EXIT button to display the menu screen, and press the M/+ or m/– button to select (USER CONFIG), then press the ENTER/ SELECT button.

The USER CONFIG menu appears.

U S E R C O N F I G

 

 

 

 

xR G B / C O M P S E L

 

xxxx

 

 

 

 

C O M P L E V E L

 

xxxxx

 

 

 

 

 

 

 

 

 

 

 

 

 

 

N T S C S E T U P

 

x

 

 

 

 

F O R M A T D I S P

 

xxxx

 

 

 

 

L A N G U A G E

E N G L I S H

 

 

 

 

D E G A U S S D E L A Y

x

 

 

 

 

 

 

 

 

 

 

 

2 Press the M/+ or m/– button to select “LANGUAGE,” then press the ENTER/SELECT button.

26 Selecting the Menu Language