USER CONTROL menuThe USER CONTROL menu is used for adjusting the picture.Items that cannot be adjusted depending on the input signal are displayed in blue.
Submenu | Setting | |
AUTO CHROMA/ | Adjusts color intensity (CHROMA) | |
PHASE | and tones (PHASE). | |
| • AUTO ADJ VALUE: Chooses | |
| the values to be applied to | |
| the chroma and phase from | |
| auto adjustment or factory | |
| settings. | |
| ON: auto adjustment values | |
| OFF: factory preset values | |
| • START: Displays the color bar | |
| signals (Full/SMPTE/EIA) | |
| on the screen. To select one, | |
| press ENTER/SELECT | |
| button. The auto adjustment | |
| function starts. After the | |
| adjustment has been done | |
| correctly, AUTO ADJ | |
| VALUE is automatically set | |
| to ON. Press the MENU/ | |
| EXIT button to exit the | |
| adjustment screen. | |
|
| |
| Note |
|
| If you have selected full color bars, | |
| be sure to enter eight color bars. | |
|
| |
SUB CONTROL | You can finely adjust the | |
| adjustment range of the following | |
| controls on the control panel; the | |
| CONTRAST, PHASE, CHROMA | |
| and BRIGHT controls. | |
| • ADJUST...: adjusts the | |
| following items. | |
| CONTRAST...: Adjusts the | |
| picture contrast. | |
| BRIGHT...: Adjusts the picture | |
| brightness. | |
| CHROMA...: Adjusts the color | |
| intensity. The higher the | |
| setting, the greater the | |
| intensity. | |
| The lower the setting, the | |
| lower the intensity. | |
| PHASE...: Adjusts color tones. | |
| The higher the setting, the | |
| more greenish the picture | |
| becomes. | |
| The lower the setting, the | |
| more purplish the picture | |
| becomes. | |
| APERTURE...: Adjusts the | |
| picture sharpness. The higher | |
| the setting, the sharper the | |
| picture. | |
|
|
|
USER CONFIG menuThe USER CONFIG menu is used to select a language for the menus and the
Submenu | Setting |
RGB/COMP SEL | According to the type of video |
(for the | signal which you intend to input to |
the RGB/COMPONENT | |
| connectors, choose between RGB |
| and COMPONENT. |
|
|
COMP LEVEL | Select the component level from |
| among three modes. |
| SMPTE: 100/0/100/0 signal |
| BETA 7.5: 100/7.5/75/7.5 signal |
| BETA 0: 100/0/75/0 signal |
|
|
NTSC SETUP | Select the NTSC setup level from |
| two modes. |
| The 7.5 setup level is used mainly |
| in North America. The 0 setup level |
| is used mainly in Japan. |
|
|
FORMAT DISP | Determines whether the format of a |
| input signal is displayed on the |
| screen or not. |
| ON: The format is always |
| displayed. |
| OFF: The format is always |
| hidden. |
| AUTO: The format is displayed |
| for about 10 seconds when the |
| input of the signal begins. |
|
|
LANGUAGE | You can select the desired language |
| for the menus or messages from the |
| following language options. |
| : Japanese |
| ENGLISH: English |
| DEUTSCH: German |
| FRANÇAIS: French |
| ITALIANO: Italian |
| ESPAÑOL: Spanish |
| : Chinese |
|
|
DEGAUSS DELAY | Sets the delay time for auto |
| degaussing to start working after |
| the power is turned on. The delay |
| time can be set within 0 to 99 |
| seconds. |
|
|
CAPTION | Selects the caption display mode |
(available only when the | from among the following options: |
Caption Vision (Closed | OFF, CAPTION 1, CAPTION 2, |
Caption) Decoder has | TEXT 1 and TEXT 2. |
been installed.) |
|
|
|
Adjustment Using the Menus | 29 |
|
|