About retaining the settingsThe settings are automatically stored in the monitor memory.To reset items being adjusted

Press the RESET button while the new menu item is being selected and adjusted. Any changes to this new item setting is ignored and the item is reset to the previous setting.

Adjustment Using the Menus

Items

The screen menu of this monitor consists of the following items.

STATUS1)

 

COLOR TEMP/BAL

 

COLOR TEMP

 

 

USER CONTROL

 

 

 

MANUAL ADJ

 

 

 

 

 

 

AUTO CHROMA/PHASE

 

 

 

 

 

 

 

 

 

SUB CONTROL

 

 

 

 

 

 

USER CONFIG

 

 

RGB/COMP SEL2)

 

 

 

 

 

 

 

 

 

COMP LEVEL

 

 

 

 

 

 

 

 

 

 

 

 

NTSC SETUP

 

 

 

 

 

 

 

 

 

 

 

 

FORMAT DISP

 

 

 

 

 

 

 

 

 

 

 

 

LANGUAGE

 

 

 

 

 

 

 

 

 

 

 

 

DEGAUSS DELAY

 

 

 

 

 

 

REMOTE

 

 

 

 

 

CAPTION3)

 

 

 

 

 

 

 

 

1 PIN

 

 

 

 

 

 

 

 

 

2 PIN

 

 

 

 

 

 

 

 

 

 

 

 

3 PIN

 

 

 

 

 

 

 

 

 

 

 

 

4 PIN

 

 

 

 

 

 

 

 

 

 

 

 

6 PIN

 

 

 

 

 

 

 

 

 

 

 

 

7 PIN

 

 

 

 

 

 

 

 

 

 

 

 

8 PIN

OPTION CONFIG4)

 

1)The items on the STATUS menu indicate the current settings.

2)for the PVM-14L2/PVM-20L2 only

3)CAPTION is available only when the Caption Vision (Closed Caption) Decoder has been installed.

4)The items on the OPTION CONFIG menu differ depending on the optional board installed.

Adjusting and Changing the Settings

STATUS menuThe STATUS menu is used to display the current status of the monitor.

Submenu

Setting

FORMAT

Display only

 

 

COLOR TEMP

Display only

 

 

COMP LEVEL

Display only

 

 

NTSC SETUP

Display only

 

 

RGB/COMP SEL

Display only (for the PVM-14L2/

 

PVM-20L2 only)

 

 

OPTION

Display only

 

 

COLOR TEMP/BAL menuThe COLOR TEMP/BAL menu is used for adjusting the picture white balance.You need to use a measurement instrument to adjust the white balance.

Submenu

Setting

COLOR TEMP

Select the color temperature from

 

among D65, D93 and USER

 

setting.

 

 

MANUAL ADJ

If you set COLOR TEMP to USER,

 

the item displayed is changed from

 

blue to white, which means you can

 

adjust the color temperature.

 

• ADJUST GAIN...: Adjusts the

 

color balance (GAIN).

 

• ADJUST BIAS...: Adjusts the

 

color balance (BIAS).

 

• COPY FROM: If you select

 

D65 or D93 with the M/+ or

 

m/– button, the white

 

balance data of the selected

 

color temperature will be

 

copied to USER.

 

 

28 Adjustment Using the Menus