5Hook the Stand Base holes onto the prongs of stand to attach. 1Lift the handle of screw to screw the stand base securely. 2Be sure that the screw is secured and turn the screw handle back.

1 Stand Base

2 Screw

6Remove the stopper pin after raising the height adjustable stand straight.

Stopper Pin

Note

Do not remove the stopper pin while the stand is laid. It may fall or injure you by the stand neck coming off from the Stand Base impetuously.

xWhen using VESA Stand

Screws compatible with VESA stand (4)

You can attach a VESA stand in other brand by removing the supplied stand attached to the display.

Setup 2:Connect the video signal cables• Turn off the display and computer before connecting.Notes

• Do not touch the pins of the video signal cable connector as this might bend the pins.

• Check the alignment of the connector to avoid bending the pins of the video signal cable connector.

1 Slide down the connector cover.

Connector cover

GB

2Tilt the display up.And then move the display’s angle higher.

7