Setup 4:Connect the audio cordsIf you are not intended to output audio, you do not need this connection.

1Connect the display’s audio input jack and audio output jack of the computer or other audio equipment using the supplied audio cord.

to audio output of

to the audio

the computer or

input

other audio

 

equipment

 

audio cord (supplied)

 

2Connect the audio cable (not supplied) securely to the display’s audio output jack.

to the audio output

audio cable (not supplied)

Audio output will be changed when the display’s audio input and audio output connection has been completed.

Connect audio equipment that is within the input range shown in the display’s audio input specifications. Too high of an input may cause damage to the display.

Setup 5:Connect the power cord1Connect the supplied power cord securely to the display’s AC IN connector.2Connect the other end securely to a power outlet.

1 to AC IN

2to a power outlet power cord (supplied)

Setup 6:Secure the cords andclose the connector cover GB1Draw the cords and cables through the cable holder as illustrated.2Close the connector cover.

Note

When bounding the cords and cables, be sure to loosen them a little. If they get pulled hard they may come off from the connectors/plugs as you adjust the display angle. If you stretch the cords and cables too hard they may get damaged.

9