Sony SDM-S205 Specifications, SDM-S205F, SDM-S205K, Model name

Specifications

Model name	SDM-S205F					SDM-S205K
LCD panel		Panel type: a-Si TFT Active Matrix
Picture size: inch					20.1
Input signal format				RGB operating frequency1)
	Horizontal: 28 – 92 kHz (analog RGB)
				28 – 75 kHz (digital RGB)
		Vertical: 48 – 85 Hz (analog RGB)
				60 Hz (digital RGB)
Resolution				Horizontal: Max.1600 dots
				Vertical: Max.1200 lines
Type of input signal				Digital ⋅ 1/Analog ⋅ 1
(Digital/Analog)
Input signal levels	Analog RGB video signal 0.7 Vp-p, 75 Ω, positive
	SYNC signal TTL level, 2.2 kΩ, positive or negative
	Digital RGB (DVI) signal TMDS (single link)
Audio input				Stereo minijack, 0.5 Vrms
Audio output				Stereo minijack
USB port	–					USB Full-Speed (Max12 Mbps)
						A Port ⋅ 4, B Port ⋅ 2
Power requirements		100 – 240 V, 50 – 60 Hz, Max. 1.2 A
								GB
Power consumption				Max. 55 W
Operating temperature					5 – 35 °C
Type of the stand	Height adjust					Pivot
Dimensions (width/height/	Approx. 441.5 ⋅ 410.5 – 520.5 ⋅ 277.5 mm					Approx. 441.5 ⋅ 421 – 551 ⋅ 277.5 mm
depth)	(17 3/8 ⋅ 16 1/4 – 20 1/2 ⋅ 11 inches)					(17 3/8 ⋅ 16 5/8 – 21 3/4 ⋅ 11 inches)
	(with stand)					(with stand(normal condition))
	Approx. 441.5 ⋅ 356.5 ⋅ 74 mm					Approx. 356.5 ⋅ 470.5 – 600.5 ⋅ 277.5 mm
	(17 3/8 ⋅ 14 1/8 ⋅ 2 7/8 inches)					(14 1/8 ⋅ 18 5/8 – 23 3/4 ⋅ 11 inches)
	(without stand)					(with stand (pivoted condition))
						Approx. 441.5 ⋅ 356.5 ⋅ 74 mm
						(17 3/8 ⋅ 14 1/8 ⋅ 2 7/8 inches)
						(without stand)
Mass	Approx. 9.6 kg (21 lb 2 3/8 oz)					Approx. 9.9 kg (21 lb 12 3/16 oz)
	(with stand)					(with stand)
	Approx. 6.0 kg (13 lb 3	3/	8	oz)		Approx. 6.1 kg (13 lb 6	3/ oz)
	(without stand)					(without stand)	5
Plug & Play					DDC2B
Accessories				See page 6.

1)Recommended horizontal and vertical timing condition

•Horizontal sync width duty should be more than 4.8% of total horizontal time or 0.8 µs, whichever is larger.

•Horizontal blanking width should be more than 2.5 µsec.

•Vertical blanking width should be more than 450 µsec.

Design and specifications are subject to change without notice.

23