Sony SDM-S205 ZOOM menu, MENU POSITION menu, INPUT SENSING menu, Items, Items, Items, Items, Items, Features, Features, Features, 2Load the CD-ROM, For Macintosh user

settings may have to be repeated if you change the input signal after reconnecting your computer.

Items	Features
AUTO	Make the appropriate adjustments of the
	screen’s phase, pitch and horizontal/
	vertical position for the current input
	signal and save them.

xAdjust the picture’s sharpness and position manually (PHASE/PITCH/H CENTER/V CENTER)

You can adjust the picture’s sharpness and position as follows.

1Set the resolution to 1600 × 1200, on the computer.2Load the CD-ROM.3Start the CD-ROM and display the test pattern.For Windows User When Auto run operates:

1 Click “DISPLAY ADJUSTMENT TOOL (UTILITY).” 2 Click “Adjust” and confirm the resolution and then click

“Next.”

Test pattern for PITCH, PHASE, H CENTER and V CENTER appears in order.

When Auto run fails to operate:

1 Open “My Computer” and right click the CD-ROM icon.

Go to “Explorer” and open the CD-ROM icon.

2Open [Utility] and then select [Windows].

3 Start [Win_Utility.exe]. Test pattern appears.

For Macintosh user

1Open [Utility] and then select [Mac].

2 Start [Mac_Utility.exe]. Test pattern appears.

Items	Press the m/M buttons
PHASE	Minimize the horizontal stripes on the
	screen.
PITCH	Vertical stripes become vanished.
H CENTER	Adjust the picture position when your
	picture does not appear on the center of
V CENTER
	the screen.

ZOOM menu

Items	Features
FULL	The input signal is displayed on the
	screen in full, irrespective of the
	picture’s mode or resolution.
ASPECT KEEP	The input signal is displayed on the
	screen at its actual aspect ratio.
	Therefore, black bands may appear at the
	top and bottom of the picture, depending
	on the signal.
REAL	The input signal is displayed on the
	screen at its actual resolution. Sub-1600
	× 1200 signals are displayed at the center
	of the screen surrounded by a black
	frame.

Note

You cannot use this feature when the signal at resolution is 1600 × 1200. The picture is displayed on the screen in full.

MENU POSITION menu

Items	Press the m/M buttons
MENU POSITION	You can change the menu displayed
	position on the screen. You can choose
	one of 9 positions.

INPUT SENSING menu

You can search any input signals, switching the signals back and forth automatically.

Items	Features
AUTO ON	When the selected input has no signal, or
	when you select an input with the OK
	button and if it has no input signal, an
	on-screen message appears (page 19).
	Then the display checks the input signal
	and switch to other input automatically.
	When an input is changed, the selected
	input is displayed on the upper left
	corner of the screen.
	When there still is no input signal, the
	display goes into the power saving mode.
INPUT 1	When turning on the display, INPUT1 or
	INPUT2 will be displayed as priority
	setting (INPUT SENSING will not
INPUT 2
	function).
AUTO OFF	The input is not changed automatically.
	Press the OK button to change the input.

16