Getting Started
16

Step 7 Setting up the unit with EASY SET UP (continued)

7Press EXECUTE.
Auto Clock Set starts searching for a TV station that carries
the time signal, and sets the clock time automatically. The
date is also set if the TV station transmits date data.
When the clock setting is complete, the following screen
appears.
If the unit’s VCR does not receive the time signal from any
station, “1.1. 1996 MON 0:00” appears and AUTO ADJUST
is set to OFF.
8If the clock setting is not correct, adjust the date
and time manually or change the station for Auto
Clock Set using CURSOR >/./?//.
The setting procedures are the same as those described in
“Manual setup — Setting the clock” on page 29.
9Press EXECUTE.
The CENTRE MODE selection menu appears.
10 Press ?// to select the centre mode.
See “Selecting the centre mode” on page 18 for details.
11 Press EXECUTE.
Each speaker emits the test tone in turn (the speaker
emitting the test tone is indicated by the red speaker mark).
Check each speaker’s relative volume balance with the test
tones.
EASY SET UP
CLOCK SET
–.–.–––– –:
PLEASE WAIT
123 654––––– 7
END
SET :
:EXECUTE
EASY SET UP 123 654––––– 7
CENTRE
REAR 0
0dB
dB
SELECT :
TEST TONE
EXECUTE
CURSOR
EXECUTE
CURSOR
EXECUTE
7 WED.
11
1.996 5:30
NEXT
SET :
:
SELECT :
EXECUTE
CLOCK SET
21
ON OFF
BBC11
CLOCK PROG
AUTO ADJUST
EASY SET UP 123 654––––– 7
NEXT
SET :
:
CENTRE MODE
EXECUTE
PHANTOM
EASY SET UP 123 654––––– 7
NEXT
SET :
:
CENTRE MODE
EXECUTE
NORMAL
EASY SET UP 123 654––––– 7