Recording TV programmes using Video Plus+ | Sony SLV-AV100UX

Recording TV programmes using VIDEO Plus+

1	2	3	VIDEO Plus+
4	5	6	Number
7	8	9	buttons
7	8	9
>10	0		ENTER

TIMER REC

ON/OFF

TAPE SPEED (SP/LP)

Tip

•To cancel the procedure, press VIDEO Plus+ before pressing ENTER.

Note

•If the unit’s VCR beeps repeatedly, the PlusCode is incorrect.

Just enter the programme’s “PlusCode” listed in the TV programme guide. The date, times and programme position of that programme are set automatically. You can preset up to eight programmes at a time.

Before you start…

•Check that the unit’s clock is set to the correct time.

•Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time.

•Press VHS TUNER.

–If the TV doesn’t turn on, turn it on manually.

Press VHS TUNER again if connected with a EURO-AV (Scart) cable.

–If connected with a EURO-AV (Scart) cable, the TV is automatically set to VCR reception.

–If connected with only the antenna cable, set the TV to the VCR’s programme position manually.

1 Press VIDEO Plus+.
1 Press VIDEO Plus+.			VIDEO Plus+
				PLUSCODE			SP / LP
				–– –– ––– – –				SP
			SET		:
			SET		:	0 – 9
			SP / LP		:	TAPE	SPEED


2 Press the number buttons to enter
2 Press the number buttons to enter			VIDEO Plus+
the programme’s PlusCode.				PLUSCODE			SP / LP
				82 47 7 69 1 –				SP
If you make a mistake, press TIMER
CLEAR and enter the correct number.			CONFI RM
CLEAR and enter the correct number.			CONFI RM			ENTER
			CANCEL		:	T I MER CLEAR


3 Lift the top cover of the remote
commander, then press TAPE
commander, then press TAPE			VIDEO Plus+
SPEED to select SP or LP.				PLUSCODE			SP / LP
SPEED to select SP or LP.				82 47 7 69 1 –				LP
			CONFI RM
			CONFI RM			ENTER
			CANCEL		:	T I MER CLEAR

continued

Basic VCR Operations

37

Image 37

Sony SLV-AV100UX operating instructions Recording TV programmes using Video Plus+

Contents

Amplifier Integrated Video Cassette Recorder Safety PrecautionsInstalling Compatible colour systems Table of contents Step Inserting the batteries Using the remote commanderGetting Started Unit and the EURO-AV Scart connector On the TV Aerial input on your TV usingBefore you connect Disconnect the aerial cable from your If your TV doesn’t have a EURO-AV Scart connector Connecting speaker systems Listening through the headphones Connecting an active wooferSpeakers Rear L/R connectors Placing the speakers Connecting various audio/video equipment Connect the mains lead to the mains Supplied Conserving power while the unit is standing by Press ON/STANDBY to turn on the unit To check that the TV tuning is correctPress RF Channel on the unit Turn on your TV and select a programme position Press VHS Tuner to turn on the unit and TV Press Easy SET UP on the unitSet the TV for VCR reception Preset automatically, change the programme Lift the top cover of the remote commanderPositions of the stations, and disable the unused Programme positions. If all the settings are Press ?// to select the centre mode Setting up the unit with Easy SET UP Have an equal volume balance with the other Decrease the volume of the centre speaker so youVolume of the rear speakers so you have an Equal volume balance with the other speakers at If you have only front and centre speakers If you have only front and rear speakers Before you start… Manual setup Presetting channels Manual setup Presetting channels If the picture is not clear Disabling unwanted programme positions Manual setup Selecting station names/setting up Video Plus+ Press Cursor / to highlight the guide channel column only Guide Station name Channel Setting up Video Plus+ for satellite broadcasts Changing programme positions Manual setup -- Changing/disabling programme positions ITV BBC1 BBC2 CH4 Select Manual setup -- Changing/ disabling programme positions Setting the clock manually Manual setup Setting the clock Manual setup Setting the clock Changing the station for Auto Clock Set Basic VCR Operations Playing a video tape To change the information in the display window To use the time counterTo mute the sound Fields Using the pre- programmed sound Press r REC to start recording To stop recording Recording TV programmesTo check the remaining tape length To watch another TV programme while recording To save a recording Recording TV programmes Recording TV programmes using Video Plus+ To record satellite broadcasts Recording TV programmes using Video Plus+ Using the unit after setting the timer Setting the timer manually Press Cursor / to confirm the setting Timer recording with PDC signalsPress Execute Press Timer REC ON/OFF Daily/weekly recording Checking/changing/ cancelling timer settings When the timer settings overlap Audio/Video Equipment Operations Selecting the equipmentControlling the function buttons Before operating audio/video equipment Watching a picture while listening to audio equipmentFunction buttons on the unit Function To turn off the whole system To increase or decrease the volume Controlling VCRs Controlling VCRs which have the Command Mode selectorTurning on and controlling the unit’s VCR To relate VIDEO1 or VIDEO2 with Command Mode again Using the remote commander buttons to control the other VCRControlling VCRs Turning on and controlling another VCR Turning off the selected VCR Controlling the TV Turning off the TV Controlling the TV Using the TV independentlyTo select the TV’s input source To scan preset stations Listening to preset radio programmesTo scan the preset stations Listening to a radio programme To locate a track with the number buttons Playing back a CD Playing a tape Controlling a cassette deckRecording on a tape Controlling a cassette deck Controlling a DAT deck Customizing the remote commander for a DAT deck Controlling a DAT deck Controlling an MD deck Customizing the remote commander for an MD deckPlaying an MD Recording on an MD Controlling an MD deck Controlling an LD player Customizing the remote commander for an LD playerPlaying back an LD To start playback from the beginning of either LD side Turning off the LD player Controlling an LD player Sound Field Operations Taking advantage of the sound fieldsSelecting the sound field To temporarily turn off the sound effect you set What’s Dolby Surround and Dolby Pro Logic Surround? Taking advantage of the sound fieldsWhat’s surround sound? Getting the most out of Dolby Pro Logic Surround sound Adjusting the delay time Customizing the sound fields To start your adjustment from a flat equalizer curve Adjusting the tone for all sound fieldsTo return to the previous menu Press Cursor /. to move the cursor I to Tone Edit Source, then repeat steps Start playing a programmeHighlight Effect Press EXECUTE, then press Cursor Reinforcing the bass sound for all sound fields Source, then repeat steps Through 4 in Using the preSound fields in step Reconfiguring the Prologic and Theatre sound fields Increasing the maximum rear speaker level Playing/searching at various speeds Using the Click Shuttle ringAdvanced VCR Operations To extend the duration Recording TV programmes using the quick timer Nicam system Recording stereo and bilingual programmesTo select the sound while recording How sound is recorded on a video tape To stop searching Searching using the index function Adjusting the tracking Adjusting the pictureAbout Optimum Picture Control OPC Menu choices Changing menu options Editing Recording from another VCR or LD playerBefore you start editing Before you start dubbing… Audio dubbing To listen to both the hi-fi and normal audio To stop while editing To restore the factory settings for VIDEO1 or VIDEO2 Customizing the remote commander function buttonsAdditional Information Factory set functions Symptoms caused by contaminated video heads Troubleshooting Troubleshooting Remote commander does System Amplifier General SpecificationsVCR Inputs and outputs Front panel Index to parts and controls Front panel, with cover opened Display window Rear panel Index to parts and controls Remote commander Remote commander, with top cover opened Y, Z Index