Controlling an LD player
(continued)
To locate a particular chapter or track
Press any number button to enter the single digit chapter/track number (except 0).
For
Examples of entering a two-digit number
To | Press |
|
|
Enter 30 | >10 three times, then press 0 |
|
|
Enter 14 | >10 once, then press 4 |
|
|
To play a chapter or track on the opposite side of the LD, press
9 SIDE B while playing SIDE A (or ( SIDE A while playing SIDE B), then enter the chapter or track number.
To play frame-by-frame (Step Play)
Press '/7 FRAME repeatedly. Each press shifts the picture to the next frame.
For continuous frame playback, press and hold '/7 FRAME. To resume normal playback, press · PLAY.
To listen to analog sound from an LD
If your LD contains digital sound tracks, the player automatically outputs digital sound. To listen to the sound recorded on analog soundtracks, press ANALOG/´. To resume the digital mode, press ANALOG/ ´ again.
To play a stereo disc or Second Audio Programme (SAP) disc
When playing SAP discs such as bilingual discs, you can alternate the sound output by pressing AUDIO MONITOR. Each press changes the sound as follows.
Stereo disc | SAP disc |
|
|
|
|
Left channel | Sound track 1 | (Left channel) |
|
|
|
Right channel | Sound track 2 | (Right channel) |
|
| |
Stereo (Both channels) | Both tracks (Left and right channels) | |
|
|
|
To play an LD with the ´ (CX) logo
LDs with the ´ logo are recorded with the CX noise reduction system for analog sound. Although LD players usually detect and activate this system, you can manually set the LD player to use the system.
Press ANALOG/´.
To cancel this function, press ANALOG/´ again.
Turning off the LD player
Press u while the remote commander is in LD control mode.
60
Audio/Video Equipment Operations
