Editing
Recording from another VCR or LD player
EDIT VHS | VIDEO |
P PAUSE | r REC |
Tips
•To cut out unwanted scenes while editing, press P PAUSE on the unit when an unwanted scene begins. When it ends, press P PAUSE again to resume recording (Assemble Editing).
•You can record audio sound from the desired input source on the video tape by pressing AUDIO repeatedly in step 4.
Note
•If you follow this procedure to start recording, the unit’s VCR won’t record with the OPC function. To record a tape with the OPC function, press r REC again during recording pause in step 2 so the unit’s VCR analyses the tape. Then when you start recording in step 6, press P PAUSE after the OPC indicator stops flashing. If you press P PAUSE before the OPC indicator stops flashing, the OPC function is cancelled.
Before you start editing
•Connect another VCR or LD player to the unit referring to the connections on pages 10 through 12.
•Press VHS TUNER.
–If the TV doesn’t turn on, turn it on manually.
Press VHS TUNER again if connected with a
–If connected with a
–If connected with only the antenna cable, set the TV to the VCR’s programme position manually.
•Press TAPE SPEED to select the tape speed, SP or LP.
•On this unit, press EDIT so “EDIT” appears in the display window. If the other VCR has a similar switch, set it to ON as well.
•Do not use the remote commander in the following procedure.
1 Insert a tape with its safety tab in place into the unit (recording VCR).
Search for the point to start recording and press P PAUSE.
2 Press r REC on the unit to set it to recording pause.
3 • Insert a source tape with its safety tab removed into the other (playback) VCR when recording from another VCR.
•Insert an LD into the LD player, when recording from an LD player.
4 Press VIDEO or VHS repeatedly to select the input (playback) source (VIDEO1, VIDEO2, or LINE).
5 Search for the point to start playback and set it to playback pause.
6 To start editing, press P PAUSE on this unit and release the pause mode on the other equipment at the same time.
To stop editing
Press the p STOP buttons on both units.
Editing
77
