Basic VCR Operations
Playing a video tape
Before you start...
•Turn MASTER VOLUME to the leftmost position (0) to avoid damaging your speakers.
1 Press VHS TUNER.
1 2 3
4 5 6
7 8 9
>10 0
MASTER VOLUME
6 EJECT
MASTER VOL +/–
0 R E W ) F F
P PAUSE
•If the TV doesn’t turn on, turn it on manually.
Press VHS TUNER again if connected with a
•If connected with a
•If connected with only the antenna cable, set the TV to the VCR’s programme position manually.
2 Insert a video tape.
The unit’s VCR starts playing automatically if you insert a tape with its safety tab removed.
3 Press · PLAY.
When the tape reaches the end, it will rewind automatically.
4 Press MASTER VOL +/– on the remote commander to adjust the
· P L AY
p STOP
Tips
•The unit turns on if you insert a tape while the power is off.
•The counter resets to “0H00M00S” whenever a tape is inserted.
Notes
•The unit’s sound won’t be reproduced through the TV unless the speaker connectors or TAPE/MD REC OUT jacks are connected to the TV. Normally, the speakers connected to the unit reproduce the sound.
32 Basic VCR Operations
volume.
Additional tasks
To | Press |
|
|
Stop play | p STOP |
|
|
Pause play | P PAUSE |
|
|
Resume play after pause | P PAUSE or · PLAY |
|
|
Search forward | During playback, press and hold ) FF. |
| To resume normal playback, release the button. |
|
|
Search backward | During playback, press and hold 0 REW. |
| To resume normal playback, release the button. |
|
|
) FF during stop | |
|
|
Rewind the tape | 0 REW during stop |
|
|
Eject the tape | 6 EJECT |
|
|
To play an NTSC-recorded tape
Set NTSC PB on the rear of the unit according to the colour system of your TV.
When your TV is | Set NTSC PB to |
|
|
PAL only | ON PAL TV |
|
|
PAL and NTSC | NTSC 4.43 |
|
|
