Sony SLV-AV100UX Press Cursor /. to move the cursor I to, Speakers at your listening position

12CURSOR	Press CURSOR >/. to move the cursor (I) to
	CENTRE. Then, press CURSOR ?// to increase or
	decrease the volume of the centre speaker so you
	have an equal volume balance with the other
	speakers at your listening position.
	If you selected PHANTOM in step 10, skip this step.
	This volume adjustment affects only the PROLOGIC sound
	field.

EASY SET UP

	1 – 2 –3 –4 –5 –6 – 7
CENTRE	+8 dB
REAR	0 dB
	TEST TONE

SELECT	:
SET	:
END	:	EXECUTE

Getting Started

13CURSOR	Press CURSOR >/. to move the cursor (I) to REAR.
	Then, press CURSOR ?// to increase or decrease
	the volume of the rear speakers so you have an
	equal volume balance with the other speakers at
	your listening position.

If you selected 3CH LOGIC in step 10, skip this step. The surround speakers’ volume balance is always even. This volume adjustment affects only the PROLOGIC sound field.

EASY SET UP

	1 – 2 –3 –4 –5 –6 – 7
CENTRE	+ 8 dB
REAR	+ 10 dB
	TEST TONE

SELECT	:
SET	:
END	:	EXECUTE

14 EXECUTE Press EXECUTE. 1

A programme position appears on the TV screen.

Tips

•To adjust the relative volume balance between the front left and right speakers, use BALANCE L/R on the unit.

•If you change the speaker configuration, reset the modes. See “Reconfiguring the PROLOGIC and THEATRE sound fields” on page 68.

•If you need to further increase the volume of the rear speakers from the maximum level (+10 dB), see “Increasing the maximum rear speaker level” on page 69.

Note

•Do not exit EASY SET UP while ITP is presetting channels. If you do, repeat EASY SET UP from the beginning.

continued

Getting Started

17