Sony SLV-AV100UX Getting the most out of Dolby Pro Logic Surround sound

63
Sound Field Operations
Getting the most out
of Dolby Pro Logic
Surround sound
To obtain the best possible Dolby Pro Logic Surround sound, you need
to adjust the delay time. The centre mode and speaker levels were set in
EASY SET UP, so you don’t have to change those settings unless you
change the speaker configuration.
If you change the speaker configuration, see “Reconfiguring the
PROLOGIC and THEATRE sound fields” on page 68.
Adjusting the delay time
You can make the surround sound more effective by delaying the
output from the rear speakers (delay time) relative to the front speakers.
You don’t have to adjust the delay time if you select 3CH LOGIC for
CENTRE MODE.
1Repeat steps 1 through 4 in
“Using the pre-programmed
sound fields” on page 34 and
select PROLOGIC in step 3.
2Press CURSOR >/./?// to move
the cursor (I) to SUR EDIT, then
highlight DELAY.
3Press EXECUTE, then press CURSOR
?// to select 15ms, 20ms, 25ms,
or 30ms as the delay time.
Make the delay time longer when you
have placed the rear speakers in a small
room or close to your listening position,
and make it shorter when you have
placed them in a large room or far from
your listening position.
4Press MENU to return to the
original screen.
MENU
EXECUTE
CURSOR
>/./?//
SET
SELECT :
:
SOUND SET
SOUND FIELD ON
LEVEL
OFF
DELAY
TONE EDIT
BASS BOOST
SUR EDIT
PRO LOGIC
CENTRE MODE
TEST TONE
EXIT :MENU
EXECUTE,
SET
SELECT :
:
SOUND SET
SOUND FIELD ON
LEVEL
OFF
DELAY
TONE EDIT
BASS BOOST
SUR EDIT
PRO LOGIC
CENTRE MODE
TEST TONE
EXIT :MENU
EXECUTE
SUR EDIT DELAY
DELAY 20ms
EXIT :MENU
SET :
SELECT :
RETURN