Names and Functions of Controls on Screen
qd GAIN LIMIT and qf OVER GAIN indicatorsThe sending level from input section is the sum of the qh INPUT fader and the input fader of the
You can set the upper limit of the sending level by the qd GAIN LIMIT to prevent excessive output level using multiple volume controls. Each click of the [+] or
If the sending level exceeds the GAIN LIMIT value, the actual sending level is limited to the GAIN LIMIT value and the qf OVER GAIN indicator lights in red.
qgIf there is no sending sound when muted or when the INPUT fader is at the
You can adjust the INPUT fader by dragging the fader portion. The yellow marker displayed on the side of the fader indicates the fader position, which is the sum of the INPUT fader setup and the
When the sound volume of a specific input channel is to be set from the REMOTE screen and the GROUP FADER screen, the fader position determined by the
(The fader level at the yellow marker position in Fig. 1 is the
Signal flow
+10 | +10 | +10 |
+5 | +5 | +5 |
INPUT 0 | 0 | 0 |
| 0 ROUTING |
|
| |||
+10 | ||||
MASTER volume | ||||
of the | ||||
INPUT fader | INPUT fader | REMOTE1 to 6 |
| |
on the INPUT | of the | of the GROUP |
| |
OVERVIEW | FADER screen |
| ||
screen |
|
|
|
|
Fig. 1
qj LINE4 input select buttonLINE4 has the six input channel terminals of A to F.
You can select a input channel from the six channels using this button. The selected button lights in green.
10