Names and Functions of Controls on Screen

1.1 BLOCK Screen

The BLOCK screen displays the setup status and the signal level according to the internal blocks in the SRP-X700P.

If you click a button, the screen jumps to the related setup screen. You can select ON/OFF and set parameters on each screen.

3456 78 9 qa qd qfqg qh qj qk

2

w;

1

ws

wa

0 qs ql
1INPUT index

You can enter an index of each input channel. By entering the name of the connected equipment as the index, you can easily check the signal system when setting the parameters. You can enter up to 8 alphanumeric characters.

2TRIM button

The reference level of each input channel that is set on the INPUT OVERVIEW screen appears on the TRIM buttons.

3Input level meter

Displays the input signal level of each input channel.

4LCF (Low-Cut Filter) button

When you turn on the LCF button, it lights in green.

5PEQ (Parametric EQualizer) button

When you turn on the PEQ button, it lights in green.

6FR (Feedback Reducer) button

When you turn on the FR button, it lights in green.

qs AUTOMATIC MIXER button

The AUTOMATIC MIXER button lights in green while the AUTOMATIC MIXER is in operation.

qd OUTPUT MUTING button

The OUTPUT MUTING button lights in red when muted.

qf OUTPUT fader display

Displays the setup value of the OUTPUT fader.

qg EQ (EQualizer) button

When you turn on the EQ button, it lights in green.

qh DELAY button

When you turn on the DELAY button, it lights in green.

qj Output level meter

Displays the output signal level of each output channel.

qk REF LEVEL button

Displays the reference level of each output channel on the button that is set on the OUTPUT OVERVIEW screen.

7COMP (Compressor) button

When you turn on the COMP button, it lights in green.

8INPUT fader display

Displays the setup value of the INPUT fader.

9INPUT MUTING button

The INPUT MUTING button lights in red when muted.

0INPUT VIDEO TYPE display

Displays the video input signal format of 4A to 4F of LINE4.

ql ATT (ATTenuator) button

Displays the output ATT level to the internal power amplifier.

w; OUTPUT index

You can enter an index of each output channel. You can enter up to 8 alphanumeric characters.

wa CLIP indicator

The CLIP indicator lights in red when the internal power amplifier starts clipping. Adjust the output level using wfATT so that the CLIP indicator does not turn on frequently.

qa Setup.. button

The screen jumps to the ROUTING screen when this button is pressed.

ws PROTECTION indicator

The PROTECTION indicator lights in red when the power amplifier protection circuit operates.

8