Connectable projectors
Projectors meeting the following specifications can be connected.
•Equipped with
•The
Baud rate | : 9600, 19200 or 38400 bps |
Parity bit | : None, odd or even |
Data length | : 8 bits |
Stop bit | : 1 bit |
Flow control | : None |
•The
Video signal systems and limitations
This system has the following limitations depending on the video signal system used and on the operation method. The limitations are shown below.
•When component signal is used
The projector is equipped with the component signal input terminals.
Yes
The component signal and the RGB signal are used together.
Yes
No
No
The component signal cannot be used.
There is no limitation.
The projector has a single input terminal which
accepts both the component signal and RGB signal that are switched from the
No
The projector has independent input terminals which
accept the component signal and RGB signal separately that are switched from the
No
Yes
There is no limitation.
Yes | A RGB signal distributor |
| is necessary. |
The component signal and the RGB signal cannot be used together.
•When S VIDEO signal is used
The projector is equipped with the S VIDEO signal input terminal
Yes
The S VIDEO signal and the VIDEO signal are used together.
Yes
The projector can switch the S VIDEO signal input and the VIDEO signal input from the
No
The S VIDEO signal and the VIDEO signal cannot be used together.
No | The S VIDEO signal |
| |
| cannot be used. |
No | There is no limitation. |
|
Yes
There is no limitation.
25