Copy: Copies the parameters.
12
3
You can copy the parameters of the desired channel to the specified channel. Use this function when you want to use multiple channels with the same setup. However, you cannot copy the parameters of index, TRIM (INPUT), feedback reducer (INPUT) and REF LEVEL (OUTPUT).
•Select the copy source channel. 1
•Click the check box of the copy destination channel. 2
•Press OK. 3
Communication menu•Disconnect: Disconnects communication with the
•Connect: You can select the connection method on the dialog box. Download: Sends the parameters of the
Upload: Sends the parameters that are set by using
•Password Setting: You can set a password.
How to set a passwordThe [Password Setup] dialog box appears. Enter the password in the Password field. For confirmation, enter the same password again in the [Confirm password] field and click OK.
The password can be up to 8 alphanumeric characters.
Note
If you forget the password, you cannot start the system next time, so take a note of the password and keep it safely. If you forget the password, uninstall the
•Factory Preset: Resets all parameters to the default settings.
Note
Be careful that the system cannot be returned to your own settings after resetting it to the default settings.
Help menu• About: You can confirm information about the version.
You can select the setup screen for each parameter. For the INPUT and OUTPUT buttons, submenus are displayed.
3FRONT PANEL LOCK buttonYou can lock the FRONT PANEL so that the buttons and faders on the
The CONNECTION indicator lights in green while communication with the
You can return to the previous screen that was selected immediately before.
7