Names and Functions of Controls on Screen

USER DEFINE Screen

Use this screen to set the communication protocol when USER DEFINE is selected in the PROJECTOR PROTOCOL setup box.

When USER DEFINE is selected, the projector is connected to the PROJECTOR CONTROL RS-232C terminal.

Once the communication protocol between the SRP-X700P and projector has been set, the projectors not supported by default can be connected.

Note

The above-described setup does not guarantee operation of all projectors.

1

3

2

1File menu

The setups that have been entered in the USER DEFINE screen can be saved and read to and from the setup file (∗.pj7). Open : Opens an already existing projector setup file.

Save : Overwrites and saves the projector setup file.

Save as : Saves the projector setup file as a different name which is to be specified.

Note

The screen setup that can be saved and read as the projector setup file, is the only USER DEFINE screen setup. The other screen setups cannot be saved nor read.

If you want to save and read all of the USER DEFINE screen setups and other screen setups, see the description of the File menu under the “Common operation section” on page 6.

2EXIT button

Closes the USER DEFINE screen.

3Index setup

Enters the projector index.

You can enter up to 8 alphanumeric characters.

The index set here is displayed on the USER DEFINE button of the REMOTE screen.

22