Sony SRP-X700P Function, Function, Parameter, Parameter, Parameters in the PARALLEL INPUT FUNCTION setup box, Parameters in the PARALLEL OUTPUT FUNCTION setup box

Parameters in the PARALLEL INPUT FUNCTION setup box

Function	Parameter
NONE: Does not set any function.	—————
AV SEL: Selects the LINE4 input.	A: Selects A.
	to
	F: Selects F.
	OFF: Enters the off state.
LVL+: Increases the sound volume with an external switch.	Mic1: Selects Mic1.
LVL–: Decreases the sound volume with an external switch.	to
LVL: Adjusts the sound volume with an external sound volume controller.	Mic4: Selects Mic4.
Muting: Performs muting.	Mic5Line1: Selects Mic5/Line1.
	Mic6Line2: Selects Mic6/Line2.
	Line3: Selects Line3.
	Line4: Selects Line4.
	Out1: Selects output channel 1.
	to
	Out8: Selects output channel 8.
	MasterA: Selects Master A.
	MasterB: Selects Master B.
	Remote1: Selects Remote1.
	to
	Remote6: Selects Remote6.
RECALL: Recalls the desired scene No.	1: Recalls scene No. 1.
	to
	20: Recalls scene No. 20.
LINE3 Control: Controls the device connected to LINE3.	Play: Starts playback.
LINE4 Control: Controls the device connected to LINE4.	Pause: Pauses or restarts playback or recording.
	Stop: Stops playback or recording.
	FF: Starts playback in fast forward.
	Rew: Starts playback in rewind.
	Rec: Starts recording.
	Next: Moves to the next track.
	Prev: Returns to the previous track.
	On: Turns on the power.
	Standby: Sets the power in the standby state.
PJ Power: Controls the projector power.
(Turn on the projector power when the parallel input terminal	—————
is set to ON. Set the projector power to standby when the
parallel input terminal is set to OFF.)

Parameters in the PARALLEL OUTPUT FUNCTION setup box

Function	Parameter
NONE: Does not set any function.	—————
AV SEL: Outputs the tally signal when LINE4 input is selected.	A: Selects A.
	to
	F: Selects F.
	OFF: Selects off state.
–∞: Outputs the tally signal when the –∞indicator lights.	Mic1: Selects Mic1.
Over: Outputs the tally signal when the Over indicator lights.	to
	Mic4: Selects Mic4.
	Mic5Line1: Selects Mic5/Line1.
	Mic6Line2: Selects Mic6/Line 2.
	Line3: Selects Line3.
	Line4: Selects Line4.
	Out1: Selects output channel 1.
	to
	Out8: Selects output channel 8.
	MasterA: Selects MasterA.
	MasterB: Selects MasterB.
RECALL: Outputs the tally signal when the desired scene No. is recalled.	1: Selects scene No. 1.
	to
	20: Selects scene No. 20.
PJ Power: Outputs the tally signal when the projector power is	On: Selects the power on.
controlled.	Standby: Selects the standby state of the power.

21