Sony SRP-X700P 1.7 SCENE Screen, SCENE block, • ROUTING button, •GROUP FADER button, • AV SELECTOR button, •GROUP MUTING button, • INPUT MUTING button, • OUTPUT MUTING button

1.7 SCENE Screen

You can set scenes from this screen.

You can store the setups on each screen of INPUT, ROUTING, OUTPUT and GROUP FADER into the internal memory of the SRP-X700P or call them from the scene memory.

1 2 3 5

7

6

8

SCENE block

You can recall, store or clear the scenes.

To recall the scene that is set

•Select the scene No. that you want to recall, using the 1 SCENE No. button.

•Click the 2 RECALL button.

To memorize the parameter that is set

•Select the scene No. that you want to memorize, using the 1 SCENE No. button.

•Enter the 3 SCENE index. You can enter up to 8 alphanumeric characters.

•Select the function that you want to memorize, from the 4 FUNCTION area.

When recalling the scene, only the function that is selected here is recalled.

• ALL FUNCTIONS button Select all functions.• INPUT FUNCTION button

Memorizes all functions of the INPUT screen except the MUTING button, INPUT fader and LINE4 select button.

• INPUT MUTING button

Memorizes the MUTING button state of the INPUT screen.

• INPUT FADER button Memorizes the INPUT FADER.• AV SELECTOR button

Memorizes the LINE4 select button state.

• ROUTING button

Memorizes the ASSIGN button state of the ROUTING screen.

• OUTPUT FUNCTION button

Memorizes all functions of the OUTPUT screen except the MUTING button and OUTPUT fader button.

• OUTPUT MUTING button

Memorizes the MUTING button state of the OUTPUT screen.

4

9

•OUTPUT FADER button Memorizes the OUTPUT fader.•GROUP MUTING button

Memorizes the MUTING button state of the GROUP FADER screen.

•GROUP FADER button

Memorizes the fader selector button state of the GROUP FADER screen.

•Click the 5 STORE button.

Clearing the setup scene

•Select the scene No. that is to be cleared using the 1 SCENE No. button.

•Click the 6 CLEAR button.

Interlocked operation between the scene recall and the main power of projector

When the following SCENE numbers are recalled, the power of projector enters the ON state or STANDBY state as shown below. Use the interlocked operation if you want to control the power of projector when the specified scene is recalled.

SCENE No. 17 and No. 18 : The power of projector enters the ON state.

SCENE No. 19 and No. 20 : The power of projector enters the STANDBY state.

29