1.2.2 INPUT EQ Screen
You can set the
1
2
3
4 | 8 |
| 9 |
5 | 0 |
6 |
|
7 |
|
Selects the INPUT channel that you want to set.
The selected button lights in yellow.
2INPUT indexDisplays the index that is input on the BLOCK screen.
3Frequency response graphDisplays the overall frequency response characteristics of the
Low-Cut Filter Block
4LCF Turns on and off the
It lights in green when the LCF button is pressed ON.
Feedback Reducer Block
The feedback reducer suppress the positive acoustic feedback by detecting the frequency that causes howling in advance and by reducing the gain of the frequency.
5FR (Feedback Reducer) buttonSuppresses howling at the frequency that is detected when pressing the 6 Setup button.
It lights in green when the FR button is pressed ON.
Detect the howling point as follows.
•Adjust for the appropriate sound volume with the use of the TRIM controls and the INPUT fader on the INPUT OVERVIEW screen, and the REF LEVEL selection box and the OUTPUT fader on the OUTPUT OVERVIEW screen.
•Clicking the SETUP button displays the Channel Select dialog box.
•Select the channel you want to detect.
•Pressing the OK button starts the detection.
•When the detection is complete, the feedback reducer is turned on.
Note
•Set the microphones in ordinary position before starting detection.
11