Connecting the AC power cord
Before connecting the AC power cord of this receiver to a wall outlet:
•Connect the speaker system to the receiver (see page 13).
•Turn the MASTER VOLUME control to the leftmost position (0).
Connect the AC power cord(s) of your audio/video components to a wall outlet.
If you connect other audio/video components to the AC OUTLET(s) on the receiver, the receiver will supply power to the connected component(s), allowing you to turn the whole system on or off when you turn the receiver on/off.
Caution
Make sure that the total power consumption of the component(s) connected to the receiver’s AC OUTLET(s) does not exceed the wattage stated on the rear panel. Do not connect
Note
If the AC power cord is disconnected for about one week, the receiver’s entire memory will be cleaned and the demonstration will start.
Components the Up Hooking