Sony user manual User’s Guide Declaration of Conformity FCC SX-215

User’s Guide

Declaration of Conformity (FCC): SX-215

Silex Technology America, Inc, located at 157 West 7065 South, Salt Lake City, Utah 84047, USA, (801) 748-1199 declares this equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Trade Name: Silex Technology America, Inc

Product: Ethernet and Wireless 802.11b and 802.11g enabled print server

Model: SX-215

FCC ID: N6C-SX10WG

Standards used and met in the assessment:

EN55022: 1998 Class A; CFR Title 47, Part 15, Subpart B, Subpart C and Subpart E

The user is cautioned that changes and modification made to the equipment without the approval of manufacturer could void the user’s authority to operate this equipment.

Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

To satisfy RF exposure requirements, this device and its antenna(s) must operate with a separation distance of at least 20 centimeters from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

Information for Canadian Users (IC Notice): SX-215

The term “IC” before the radio certification number only signifies that Industry of Canada technical specifications were met. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

IC: 4908A-SX10WG

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

This device has been designed to operate with an antenna having a maximum gain of 2 dB. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms.

To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than the required for successful communication.

Document #40181-420 Rev. B 36