User’s Guide

SET NW WPAGROUP

Enable or disable WPA group key mode. If enabled, this allows group keys to be used for data link encryption.

SET NW WPAGROUP [ENABLE DISABLE] (default = disabled)

SH NW WPAGROUP

Shows the state of the allow WPA group keys flag

sample output:

WPA-GROUP Disabled

SET NW WPAPSK

Sets the WPA PSK pass phrase or hex key. This value is only used if the authentication mode is WPA-PSK. The argument to this command is either a pass phrase of 8-63 characters, or exactly 64 hex characters representing the 256 bit PSK value.

SET NW WPAPSK <key> (default = “silex Group”)

SET NW WPATRACE

Sets the WPA trace level. note: this command is for diagnostic purposes only, and should not normally be used as the trace can affect performance. A value of 0 disables the trace.

SET NW WPATRACE nn (default = 0)

SET NW IROAM

International Roaming (802.11d)

Document #40181-420 Rev. B

50

Page 50
Image 50
Sony SX-215 user manual SH NW Wpagroup, SET NW Wpapsk, SET NW Wpatrace, SET NW Iroam, International Roaming 802.11d