Sony SX-215 user manual Network Commands, Sh Nw, SH NW Auth, Set Nw Enc

User’s Guide

Network Commands

This group of commands configures network parameters

SH NW

Displays summary network information

sample output:

WiFi Mode = INFRASTRUCTURE

WiFi SSID: silex

Speed = 11

Regulatory Domain = 704

WiFi FW Ver = 1F 1.7.1

AP density = LOW

TTLS is Disabled

WEP is Disabled

Link DOWN

SET NW AUTHtype

Sets WLAN Authentication type

SET NW AUTHtype [OPEN SHARED TTLS LEAP PEAP WPA-PSK] (default = Open System)

SH NW AUTH

Shows the wireless authentication type

sample output:

Authentication type= OPEN SYSTEM

SET NW CHannel

Sets WLAN ad-hoc channel number

SET NW CHannel n

n=

1,2,3,4,5,6,7,8,9,10,11,36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,1

28,132,136,140,149,153,157,161,165 (default = 11, this value is ignored in Infrastructure mode)

SET NW ENC

Sets WLAN Encryption Mode. Supported modes are none, 64 bit WEP, 128 bit WEP, and TKIP (WPA).

SET NW ENC [DIsable 64 128 WPA WPA2 WPA2-WPA Dynamic WEP ] (default = Disable)

Document #40181-420 Rev. B 43