User’s Guide
SH SERVI FILters
Shows filter settings |
| |
sample output: |
|
|
# | Service Name | Filter |
1 | SLX_FFFFFF | 0: No Filter |
2 | BINARY_P1 | 0: No Filter |
3 | TEXT_P1 | 1: Text Substitution m= LF, r= |
CRLF |
|
|
4 | SLXFFFFFF_P1_4 | 0: No Filter |
5 | SLXFFFFFF_P1_5 | 0: No Filter |
6 | SLXFFFFFF_P1_AT | 4: PostScript Tagged Binary |
SET SERVI <service name> FMS
Set filter 1 (text replacement filter) match string index. If the index is zero, the default string of <LF> (line feed) is used.
SET SERVI <service name> FRM nn (default = 0 )
SET SERVI <service name> FRS
Set filter 1 (text replacement filter) replace string index. If the index is zero, the default string of <CRLF> (carriage
SET SERVI <service name> FRS nn (default = 0 )
SET SERVI <service name> IP
Enable or disable all IP based jobs (lpd, raw tcp, ftp, etc.) on the service.
SET SERVI <service name> IP [ENable DIsable]
(default = enabled for service 1 and 2, disabled for all others)
SET SERVI <service name> NAme
Change the service name
SET SERVI <service name> NAme <newname> (default varies by service)
SET SERVI <service name> POrt
Set the output port associated with a service. |
|
|
SET SERVI <service name> POrt | <portname> | |
(default = “S1”) |
|
|
|
| |
Document | 60 |
|
