Loading Paper

To load paper, follow the procedure below. Be careful not to touch the printing surface.

Notes

•Use only ink ribbon cartridge and paper “UP-2010 Color Printing Pack”, that are designed for use with this printer. Failing to do so is likely to result in unsatisfactory printing or malfunctions.

•When loading the paper while the printer is operating, do not turn off the power. Turning off the power will cause the image stored in memory to be lost.

•Do not touch the ink ribbon when handling the paper.

1 Open the front panel by pulling the front panel top towards you.

2 Push the part marked with PUSH on the paper tray. The paper tray pops out.

3 Place the paper in the paper tray.

Notes

•When adding paper to a partly full tray, be careful that the total number of sheets does not exceed the limit. If you exceed this limit, paper jams may occur.

The limit is the amount of paper coutained in one printing pack.

For detailed information on the maximum amount of paper that the paper tray can hold, see “Ink Ribbon Cartridge and Paper” page 50.

•Load the paper so that it lays flat in the paper tray. If the paper is curled, it will overflow from the paper tray and the printing position may shift. If this happens, load fewer sheets in the paper tray.

Continue to next page m

Operation 11