Making Full-Size Printouts (continued)

3 Press the CAPTURE button at the instant when the image you want to print appears on the screen.

The image is captured into memory. The memory image is displayed on the screen. Which image appears after this, the source image or memory image, depends on the setting made with AUTO LIVE on the FUNCTION SETUP menu (page 34).

If the stored image is blurred

Q 1 A

1

M

Shows that the image captured in memory is displayed on the video monitor screen.

A quickly moving image may be blurred when printed. Should this occur, change the MEMORY setting to FIELD on the LAYOUT SETUP menu. Although the blur should be eliminated, the ultimate print quality will be slightly degraded.

To change the image in memory

1To display the source image when the memory image is displayed on the screen, press the SOURCE/MEMORY button .

2Press the CAPTURE button at the instant the image you want to print appears. The previous image is replaced with the new one.

4 Press the PRINT button.

It takes about 60 seconds to make a printout.

The printout pops out from the paper tray.

Q 1

A

1

M

 

 

 

 

 

Blinks while printing

During color printing: Printing start - yellow - magenta - cyan - printing end

Note

• Do not turn off the power during printing.

If you do so, paper may not be ejected and may jam in the printer.

•Do not pull the paper from the paper cover until printing has been completed.

•You can not change the printer application mode or settings on the WINDOW SETUP menu during printing.

16Operation