Connections

To enable printing, video equipment to act as an input signal source, and a video monitor to display images or menus must be connected.

The following diagrams illustrate how to make the input, output and remote control connections. Use this as a guide when connecting the necessary signals to and from the equipment to be used for printing.

Notes

•Turn off the power of each device before attempting to make any connections.

•Connect the AC power cord last.

Making Connections for Storing Video Images

Connect the video equipment providing the video images to be printed. Connect the video equipment which will be used in actual printing, using the following diagram as a guide.

Video equipment

to S-VIDEO output

 

 

 

 

 

 

to composite video output

connector

 

 

 

 

 

 

connector

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Connecting cable (with DIN 4-pin connectors) YC-15EV

to S-VIDEO INPUT

75-ohm coaxial cable with BNC connectors

to VIDEO INPUT

UP-2100/2100SD

 

REMOTE

1 2

INPUT OUTPUT

S-VIDEO VIDEO S-VIDEO VIDEO

~AC IN

to AC IN

AC power cord (supplied)

to wall outlet

Installation and Adjustment 53