Making Variations of Printouts (continued)

2 Press the CAPTURE button at the instant the image you want to print appears on the screen.

The image has been stored to the star

(*)that blinked green on the video monitor screen in step 1.

The green blinking star (referred to as the cursor) on the monitor moves to the next position.

The blinking green cursor moves.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Q 1 A

4

 

 

M

At this time, the image captured in memory is displayed on the video monitor screen. However, the image to be displayed after a few seconds depends on the setting of AUTO LIVE in the FUNCTION SETUP menu. (see page 33)

Go to step 3 when the memory image remains on the video monitor screen. Go to step 4 when the source image is displayed.

3 Press the SOURCE/MEMORY button.

The source image appears on the video monitor screen.

4 Repeat steps 2 and 3 until you have captured four images when the memory image remains on the video monitor screen.

Repeat step 2 until you have captured four images when the source image appears on the video monitor screen.

To replace a captured image

Example: When you want to change the image stored to the third position.

1Select the third position where there is the image which you want

to replace by pressing the ￿, ￿, ı

 

 

 

or ￿button.

 

 

 

Pressing the ￿, ￿, ıor ￿button

 

 

 

moves the cursor one position

 

 

 

vertically or horizontally.

Q 1 A

4

M

Press the ￿,￿, ıor￿button until the third cursor blinks green.

2Start the video source.

If the memory image is displayed, press the SOURCE/MEMORY button to

display the source image.

3Press the CAPTURE button at the instant the image you want to print appears.

The previously stored image is replaced with the newly stored image.

36Operation