Sony UP-2100, UP-2100SD To clear the adjusted value, To check the adjustment result, When a black line appears on the printout

Setting Up the Printer (continued)

When a black line appears on the printout

Adjust the printout area according to the position of the line on the printout, by using the H START and V START items on the menu.

When the black line is at the right or left edge

WI NDOW SE T		UP	CO L OR n n n
L A Y SE T U P		P RE S S
H S T AR T			00	D OT ( S )
V S T AR T			00	D OT ( S )
H	W I DT H		720		D OT S
V	W I DT H		468		D OT S
Q 1	A		1			S

When the black line is at the top or bottom

Position where	Menu adjustment	Button to be	Adjustment result
the black line appears item		used
On the right	H START	￿button	The image position shifts to the right
	(horizontal direction)		with the size remaining as is.
On the left		ıbutton	The image position shifts to the left
			with the sized remaining as is.
At the top	V START	￿button	The image position shifts up with the
	(vertical direction)		size remaining as is.
At the bottom		ıbutton	The image position shifts down with
			the size remaining as is.

To clear the adjusted value

Press the MENU button from the WINDOW SETUP menu. The adjusted values are cleared and the values are reset to the original ones.

Note

When a black line still appears, even after adjusting H START or V START, change the printout size.

5 Select LAY SETUP by pressing the ￿or ￿button, then press the ￿button. The adjusted values are stored. The LAYOUT SETUP menu appears.

6 Press the MENU button. The regular screen appears.

To check the adjustment result

Cature a new image and print it to check that no black frame appears on the printout, that the image is not partially cut, and that no black line appears.

64Installation and Adjustment