8 Repeat steps 5, 6 and 7 to enter the remaining characters of the caption.

To enter a space

1Position the green cursor to the point where you want to enter a space by performing the operations explained in step 5.

2Select SP by pressing the ￿, ￿, ıor ￿button.

3 Press the EXEC button.

A single space is entered and the green cursor moves to the next position. If there is a character at the position where the space is entered, that character is deleted and a single space is left.

To replace a previously entered character without changing the number of characters

You can replace a previously entered character with a new one.

1Position the green cursor to the character to be replaced by performing the operations explained in step 5.

2Overwrite the invalid character with the correct character by performing the operations explained in steps 6 and 7.

The previously entered character is replaced with the new one.

To add characters midway

1Position the cursor to the position where a character is to be added by performing the operations explained in step 5.

Example: To Add a character between A and B

2Select INS by pressing the ￿, ￿, ı or ￿button.

3Press the EXEC button.

A single space is inserted between A and B and the green cursor is positioned at the space.

Note

A dark change of the monitor screen may occur after the EXEC button is pressed.

4Enter the character to be added.

1Move the cursor to B (B is highlighted green).

C A P T I ON ON

ABC

A B CDE F GH I J K L MN OPQR S T U VWX Y Z 01 23456789+ –=%

2Switch INS to green

Cursor (lit green)

C A P T I ON ON

A BC

A B CDE F GH I J K L MN OPQR S T U VWX Y Z 01 23456789+ –=%

Continue to next page m

Operation 43