Note

Never put your hand into the ink ribbon compartment. The thermal head becomes very hot. You may burn yourself if you touch it.

When the ink ribbon cartridge cannot be ejected

Turn the power off, then back on again. Then, after a while, press the ink ribbon cartridge.

In this case, the image in memory will be lost.

3 Remove any slack from the ink ribbon.

If the ribbon is left slack, it may be damaged when inserted.

Wind the spool until the not-used part comes to the right end.

4 Insert the ink ribbon cartridge firmly until it stops.

When the ink ribbon cartridge cannot be inserted

Turn the power off, then back on gain. Then, insert the ink ribbon cartridge.

5 Close the front panel.

Operation 9