When using the print pack 2UPC-C13 or 2UPC-C15

Remove the adaptors from the paper holder.

Preparations 2 Chapter

Note

Store the adaptors in a safe place so as not to lose them.

Loading the paper roll and ribbon cartridge

When using the printer for the first time, you must first load a paper roll and ribbon cartridge. When using the 2UPC-C14, adaptors must be installed in the paper holder, as described in the section “Attaching adaptors to paper holder” on page 11.

For information on how to remove a spent paper roll and ribbon cartridge, see the section “Removing the paper roll and ribbon cartridge” on page 15.

Notes

•Always use a designated print pack.

•Always replace the paper roll and ribbon cartridge together as a set.

Loading the paper roll

1 Insert the paper core into the paper roll.

Notes

•If the edges of the paper roll are uneven, make sure to even them out before installing the paper roll. Otherwise a malfunction may occur.

•If the paper is wound loosely around the core, make sure to wind it tightly before installing the paper roll. Otherwise a malfunction may occur.

•Do not grasp the paper too tightly or strike it against a hard object, because the paper may tear or crease, effecting the print quality.

2 Open the front door.

3 Press the paper holder release button and pull the paper holder out.

12 Installation