Front door open

AB

APaper holder (page 12) The paper roll is inserted here.

The white areas between printouts are cut off and collected in the top portion of the paper holder.

BPaper holder release button (page 12) Press this button to remove the paper holder.

lSide door (page 14)

Open this door for replacing the ribbon cartridge and inserting the expansion CompactFlash card.

Side door open

A B

ARibbon cartridge access opening (page 14) Mount the ribbon cartridge here.

BExpansion CompactFlash card slot (page 17) When using border print, promotional images display, text input, or print spool, insert the expansion CompactFlash card here.

Rear

 

4

 

5

1

6

2

2Chapter

 

 

7

3

Preparations

 

aUSB port (host)

Allows connection of a USB device.

You can connect a commercially available card reader or USB flash memory device to this port and use it to read

data.*1)*2)*3)

bUSB port (device) (page 48)

Use a commercially available USB cable to connect the unit to a computer.*2)

c~ AC IN (Power Source) Connector (page 10) Connect the supplied power cord here.

dDisplay stand

Use this stand to adjust the angle of the display.

eOn/Standby button

Press this button to turn on power to the unit. Press it again to enter the standby mode.

fRS-232C interface

Serves for future expansion. Currently not used.

gAir vent

Features a built-in filter for the thermal head cooling fan.

*1) Correct operation with every card reader and USB flash memory device is not guaranteed.

*2) Operation is not guaranteed when connected by a USB hub.

*3) PictBridge is not supported.

Controls and Functions

9