Sony UP-CR10L Print Tab, Print Color Tab, Gamma, [Color] tab, Dark, Light, [Position] tab, Order Numbering, Red, Green, Blue, Date Print Format, Print position adjustment

Setup 3 Chapter

[Position] tab

Lets you specify where in the image the text should be placed.

[Color] tab

Lets you specify the text color.

Note

Depending on the number of characters and text size selected, it may not be possible to print the entire text in some cases.

Print Tab

Order Numbering

Select one of the following settings related to including the order number on the prints.

•OFF

No order number is printed.

• (Print all)

The order number is printed on all photos.

• (Print first only)

The order number is printed on the first image of each order. If you print multiple copies of the first image, the

order number is printed on each copy.

The order number is printed as a watermark on the edge of the photo.

Date Print Format

Specifies the format that is used when including the date in the printout.

•YYYYMMDD (Example: 2005/10/30)

•DDMMYYYY (Example: 30/10/2005)

•MonthDDYY (Example: Oct/30/05)

•MMDDYYYY (Example: 10/30/2005)

Print position adjustment

If the print is not properly centered on the paper, you can adjust the position in the X (horizontal) and Y (vertical) direction. The adjustment range is ±2 mm in each direction.

Decrease the Y value

Increase	Decrease
the X value	the X value

Increase the Y value

Print Color Tab

Various settings related to print color and quality can be made here. Each item is set with the [b] and [B] buttons. The setting range is ±16 in steps of 2.

Red, Green, Blue

Adjusts the color component of the respective color.

Dark, Light

Adjusts gradation in dark and light sections.

Gamma

Adjusts the halftone density.

24 Setting Items