When using the print pack 2UPC-C14 or 2UPC- C15

About 100 sheets of printouts can be left on this paper tray. However, the number of printouts which can be accumulated on the paper tray changes according to the environment condition where the printer is used or the printed image. Remove the printed sheets accumulated on the paper tray as soon as possible.

When using the printing pack 2UPC-C13

Raise the eject paper stopper.

About 100 sheets of printouts can be left on this paper tray. However, the number of printouts which can be accumulated on the paper tray changes according to the environment condition where the printer is used or the printed image. Remove the printed sheets accumulated on the paper tray as soon as possible.

Note

Do not touch the printouts until they have been ejected from the printer. If a printout gets stuck in the eject slot, remove it from the slot immediately.

To remove the paper tray

Grasp the bottom of the paper tray, lift it up while keeping it horizontal, and pull it out.

Preparing an Expansion

CompactFlash Card

For using the following functions, an expansion CompactFlash card is required:

•Border print

•Promotional images display

•Text input

•System logs and print logs export

To create the expansion CompactFlash card, a commercially available CompactFlash card is used. The CompactFlash card can be a Type I, Type II, or Microdrive.

We recommend using a CompactFlash card with at least 512 MB of free space.

Creating the expansion CompactFlash card

The supplied CD-ROM contains sample templates for border prints and sample promotional images. You can create an expansion CompactFlash card by copying this data onto a CompactFlash card with your computer. If your computer cannot use CompactFlash cards, you can copy the data to another type of memory card temporarily and then copy it to a CompactFlash card with the unit.

1 Insert the CompactFlash card into the computer.

2 Copy the promotional images.

Create the folder “\Sony\UPCR\” in the root folder of the CompactFlash card, and copy the entire folder “\Sony\UPCR\Promotion” into it from the supplied CD-ROM.

3 Copy the border print templates.

The templates are stored in the folder “\Sony\UPCR\Template” on the supplied CD-ROM. The folder is divided into subfolders for each print size (3×5, 4×6, and 5×7). Create the folder “\Sony\UPCR\Template” in the root folder of the CompactFlash card, and copy the entire folder for each desired print size into it.

A CompactFlash card with at least 512 MB of free space is required to copy all the data stored on the CD- ROM.

If you have copied the CD-ROM data to a memory card other than a CompactFlash card, you will need to use the unit to copy it from that memory card to a CompactFlash card.

For details on copying the data, see “Template Tab” on page 23.

Preparations 2 Chapter

Installation 17