Operation 4 Chapter

4 Touch the button.

The compensation function is carried out.

The result is shown in the small image at the bottom of the screen.

To cancel the compensation function, touch the button.

Perform red eye reduction on one eye at a time.

Note

With some images, the compensation function may not be entirely successful.

5 Touch the [OK] button.

The original screen reappears.

Also when red eye reduction was carried out, the results will not be reflected on the preview screen. However, the symbol under the preview image indicates that the function was used.

Adding the Date

You can add the date when an image was shot to the printout.

This function is available when [Print] or [Border Print] was selected from the Main Menu.

For this function to work, the image data must conform to the Exif 2.0 or later specification.

1 On the list display of images, touch the [Add Date] button.

The date is added to all images that are printed. To cancel the setting, touch the [Add Date] button once more.

The format in which the date information is printed can be changed at the administration screen. For details, see the section “Print Tab” on page 24.

46 Adding the Date