Setup

Chapter

Setup 3 Chapter

Setup Procedure

Before the unit can be used, you must first make various settings. This includes selecting the language and currency, selecting the service mode, and setting up passwords. These settings are made from the administration screen. You can also use the administration screen later to change settings and to adjust the unit.

To bring up the administration screen, proceed as follows.

Notes

•Before you can make settings on the administration screen, you must enter the administrator password. In the factory default condition, the administrator password is set to “9999”.

•If a memory card is inserted in any of the front-side memory card slots of the unit, the administration screen does not come up. Remove any memory cards first, and then repeat the procedure.

1 At the Start Guide display, touch the top left corner of the screen twice in succession.

The password entry screen appears.

2 Enter the password using the numeric keypad.

3 Touch the [OK] button.

The administration screen appears.

By touching one of the tabs at the top of this screen, you can select the respective category to make settings. For details on each category, see the section “Setting Items” on page 21.

(System) tab

Lets you select the language to be used by the system, the beep ON/OFF setting, and the computer connection function.

The touch panel adjustment can also be performed from this tab.

(Screens) tab

Lets you select the operation mode and the promotional images function.

(Template) tab

Lets you load and delete templates and enter text to be added to images.

(Print) tab

Lets you select the order numbering format and the date format.

The print position adjustment can also be performed from this tab.

(Print color) tab

Lets you adjust the print quality.

(Pricing) tab

Lets you set the currency to use and the price of prints.

20 Setup Procedure