Start Guide

Selects the time period for which the Start Guide is displayed. When the time has elapsed, the unit automatically switches to the promotional image. When [OFF] is selected, the Start Guide is not shown.

It is not possible to set Image 1, Image 2, and Start Guide all to [OFF] at the same time.

• (Delete All)

Deletes all template data stored on the expansion CompactFlash card.

Note

Be careful when performing this procedure, because even if the existing templates are read-only files, they will be forcibly deleted.

Template Tab

This lets you load and delete templates for border print and enter text to be generated.

To use the Template tab, an expansion CompactFlash card is required. For information on the expansion CompactFlash card, see the section “Preparing an Expansion CompactFlash Card” on page 17.

Templates are created using the Adobe Photoshop plug-in that is contained on the supplied CD-ROM. For details, see the documentation of the Adobe Photoshop plug-in.

Templates

• (Copy All)

Copies all template data stored on a memory card inserted front-side memory card slot to the expansion CompactFlash card.

Touch the button and then follow the instructions that appear.

If an error message appears, check the following likely causes.

–The expansion CompactFlash card has insufficient free space.

–The file selected for copying does not meet the promotional image specifications.

Note

If there are templates with the same name stored on the expansion CompactFlash card, they will be overwritten. Be careful when performing this procedure, because even read-only files will be forcibly overwritten.

Text Input

You can enter text for addition to images. When [Print] or [Border Print] is performed, the entered text is printed along with the image. Alphanumeric characters and symbols can be used to create text.

To enter text, touch the [Text Setting] button to bring up the text input screen. For information on how to use this screen, see the section “Text Input Screen” below.

To use the entered text, select [ON].

Text Input Screen

[Input] tab

Touch the keys shown on the screen to enter text. Up to 2 lines containing a total of 128 alphanumeric characters can be entered. To make a correction, touch the [BS] (Backspace) button. If you keep touching the button, the entire line where the cursor is located will be erased.

[Font] tab

Lets you select the font to be used.

[Size] tab

Use the [+] and [-] buttons to control the text size. The size setting range is 8 - 72 points, in 2-point steps.

Setup 3 Chapter

Setting Items 23