Remove any paper remnants from the paper holder.

Notes

•There is extra paper on the paper roll. When the ribbon cartridge is finished, remove the remainder of the paper roll and install a new ribbon cartridge and paper roll.

•Make sure to use a matching paper roll and ribbon cartridge set. Using an unmatched combination will not only prevent you from obtaining normal print results but may cause a paper jam or a malfunction.

•Do not touch the printing surface of the paper roll or the ink on the ribbon cartridge. Fingerprints and other pollutants can lead to reduced print quality.

Removing the paper roll and ribbon cartridge

Removing the paper roll

1 Open the front door.

3

4 Press the latch on top of the paper holder and open the holder.

 

 

2 Chapter

5

Remove the paper roll.

Preparations

 

6 Pull out the paper core from the paper roll.

2 Press the paper holder release button and pull the paper holder out.

Note

You will need to reuse the paper core. Be careful not to misplace it.

Installation 15