Operation 4 Chapter

Using a xD-Picture Card

Inserting the xD-Picture Card

With the v mark on the xD-Picture Card facing up and forward, completely insert the xD-Picture Card into the slot.

When you insert the xD-Picture Card into the unit, it is automatically detected.

Removing the xD-Picture Card

When you see a message that prompts you to remove the xD-Picture Card, first push the xD-Picture Card until you hear a click, then pull it out.

Note

To prevent losing valuable data or damaging the xD- Picture Card, never remove the xD-Picture Card from the slot until the message prompts you to remove it.

Selecting Images for Printing

The procedure for selecting images from the inserted memory card is described below.

This procedure can be carried out in any operation mode.

1 Touch any place on the screen.

The language selection screen appears.

Memo

When using Event mode, and when only one language was selected at the administration screen, the language selection screen does not appear. Instead, the Main Menu appears. In this case, proceed to step 3.

2 Touch the language you want to use.

Precautions about using the unit are shown. Read these carefully and then touch the [OK] button.

32 Selecting Images for Printing