Sony UP-DF500 39

Sony Corporation

Contents

Page Owner's Record WARNING For the customers in the U.S.A For the customers in Canada For the customers in the U.S.A and Canada Voor de Klanten in Nederland Introduction Operation Adjustment Miscellaneous Conventions used Front panel Rear panel Liquid Crystal Display (LCD) (14, 15, 25, 26) Film remaining confirmation indicator CPRINT indicator (14, 26) DALARM indicator (25) ETOP cover (28) FVentilation holes (23) GEJECT TRAY button (11) Assembly Placing the Unit When placing the unit vertically How to attach the ferrite cores Recommended Film Loading Film Page Notes on storing film Before printing If the unit does not print Notes on storing your printouts Confirming Information Adjusting the Print Quality Calibrating the Printing Density Adjusting the Tone To adjust the low tone Chart of the low tone range To reset to the default setting of the low tone range To adjust the high tone Chart of the high tone range Selecting a Gamma Curve Safety Installation Condensation Transporting the Unit Cleaning the Cabinet To replace the cleaning roller To clean the thermal head, platen roller, pinch roller, and separation rubbers Page To clean the filters After you have finished all cleaning tasks SOP and Meta SOP Classes Error Messages Other Messages If Damage is Suspected If the Film Jams When the rear cover is opened When the top cover is opened When the top and the front covers are opened When REMOVE FILM TRAY: J7 appears Page Setup Page To confirm the IP address Opening the Setup Window Components of Pages Summary/Print Job Page DICOM Settings Page Printer Status Page E-MailSettings Page Page After all of settings have been completed When the image data is not sent When setting up an E-mail